Non posi 10 bolt rear. Stiffer bracing and bushing material than base camaro.
1800 rpm / 656.93811 = 2.73:1 x 130 = 3.54:1
Camaro rear end gear ratios. Ground clearance (in / mm) 4.5 / 115.4: It's just backwards from the way we think, if you have a 4.10 ratio and need better fuel mileage you would switch to a 3.42 or 3.73 gear ratio. Eighth gear ratio (:1) clutch size (in) n/a:
| exterior/interior info | 1969 camaro production: I think the logic was that normally this would have had the. That tells me that you could leave the rear gears that you have now and get some decent over the road gas mileage but it would be a dog off of the line.
The old addage about gearing(60’s and 70’s) was that the more gearing a car had,the faster it was.that was true,unless the car spun the tires,or the motor was overreving at the end of the quarter.most of those cars of the era had big blocks and narrow hard compound tires,so they burnt the tires for blocks and ran slow. 60.7 / 1542 60.6 / 1540: Its also a factory ac car.
1800 rpm / 656.93811 = 2.73:1 example without overdrive: J65 4 wheel disc brakes available. If it's a 3.23 to 4.10 then you can get a new eaton 3 series posi and put in it.
69ss l78 rear axle gear ratios the standard rear axle ratio for the 1969 l78 chevelle was 3.55, regardless of transmission. Ring gear tooth count = 4 1. I'm a big fan of 3.73 gears.
Well there are 4 different gear ratios you could have got. 55 / 45 56 / 44 54 / 46: Check your rpo code list on you car.
Rear ends are pretty durable. If it's the 7.5 then you need to know what your gear ratio is before you can get any parts. Assuming yours isn't obviously broken, you can overhaul it yourself.
Check madmikes data on the 1981 camaros, it confirms this. Rear axle ratio was based on transmission/ engine combo. Ive got a 1967 camaro rs with the 210 hp 327 that came with a powerglide originally.
Drivetrain codes | option info. 60.7 / 1542 60.6 / 1540: If you ordered a z28 350 you got the auto with 3:42.
Curb weight (lbs / kg) camaro manual: The 89 probably has the 26 spline axles, but it could have 28, so you need to find out about that too. Also on the ring gear.
Ive always sworn that it had a 3.08 rear ratio. Therefore you can calculate the axle ratio. Camaro coupe & z28 convertible:
2000 rpm / 656.93811 = 3.04:1. Clutch size (in) reverse ratio (:1) 3.99: The heart of the strange camaro rearend is the dana 60 gearset, which is available in 3.54, 3.73, 4.10, 4.30, and 4.56 ratios.
Figuring rearend gear ratio (ring & pinion) formula: If you ordered a z28 four speed car in the us, you got the 305 with a 3:08 ratio. Positraction (g80) manditory when equiped with 4 wheel disc brakes.
41 ÷ 11 = 3.73 Weight distribution (%, front / rear): 3:42 which was 6 spd only, 3:23 was the optional performance ratio for a4, 3:08 i think was standard, and 2:72 which was optional.
3323 / 1507 3380 / 1533: 58/32 n/mm front/rear spring rate (sc = 58/18, f41 = 58/18) 31/21 mm front/rear sway bar diameter (sc = 27/12, f41 = 29/12) 11 41 as shown is stamped on the pinion head or stem and.
225,512 coupe, 17,573 convertible, 243,085 total. Date code is 3 70 for march 1970 the gear tooth ratio of the ring and pinion for example. Pinion tooth count = 11.
If you have a 3.42 rear end ratio and need more towing power you would switch to a 4.10 ratio. I think yours is in your glove box, but it could be on the drviers door. 55 / 45 56 / 44 54 / 46
If it has the 3.08 to 2.41 gears then you will need a 2 series posi. 3.28 the gear ratios for a 6l80e (automatic) are: 3466 / 1572 3524 / 1598:
Our '79 camaro berlinetta originally had a 305 sbc, four speed saginaw, and 3.08 posi rear.
0 komentar:
Posting Komentar